Basic Set Includes:

• DLED3N-BI: 40W bi-color LED focusing light head
• DTneo+: DC control ballast with V-mount socket
• DPOWN: 4' head cable
• DBDS8: 8-leaf barn door
• DPLSS: Light shield ring

PLEASE NOTE: The optional DLPS15-100 AC/DC V-Mount adapter for the ballast is selectable above.

DLED3N-BI Light Head

The Dedolight NEO DLED3N-BI light head maximizes bi-color output in the a smallest of dedolight housings. Weighing in at a mere 17.6oz, three of these lights can easily fit into a carry-on bag with their DTneo ballasts. Like its predecessor, the DLED3-BI, this light draws a constant 40W of power from the DTneo ballast by alternating between sets of 40w tungsten LEDs and 40w daylight LED's mixed in the COB. This means the light delivers full 40W output at all times, rather than splitting power between two 20w diode sets and calling It a 40w light. It has a robust light ratio with a focusing range of 50° to 5° (and a 1:7 output ratio), something only possible with very unique aspheric optics on a dedolight bi-color light head. 

Unlike open-faced LED lights that require beam-shaping accessories to get a fixed beam angle, Dedolight LED focusing lights provide a very controllable focusing range straight out of the box. The DLED3N-BI light head features the same beam quality and output as its predecessor. The new housing has a pigtail head cable connector, and is compatible with all "S" size accessories from the DLED2 and DLED3 series.

Difference Between DLED2N and DLED3N

Both the DLED2N and DLED3N light heads share the same housing and operate with DTneo or DTneo+ ballasts. Both share all S-size optical accessories. The main difference lies in the output versus the power consumption: the DLED2N is a 20W light head, while the DLED3N is 40W. With that, the DLED2N generates less heat, allowing for passive cooling. The DLED3N, on the other hand, is actively cooled and offers more raw punch for those requiring higher output.

DTneo Ballast

The DTneo series simplifies control compared to the previous DT3 series. The DTneo and DTneo+ ballasts offer AC/DC operation, a V-mount plate for battery use, and DMX as a standard feature. The optional AC adapter electronics are housed in a snap-on V-mount battery shell.

The beauty in the DTneo is its auto-detection of which Neo light head model its connected to. If connected to a mono or bi-color light, if identifies the necessary controls and presents them to the user. Use the push/turn knob and OLED display to select between linear or exponential dimming curves, or change color seamlessly without drifting—even at very low dimming levels (0.1 to 100% dimming range). Choose between 8-bit linear or 16-bit advanced control via DMX/RDM protocol, and shoot up to 50,000 fps flicker-free using the high-speed setting. The DTneo ballast is future-proof, with user-upgradable software via USB, and can drive all Neo light heads from 20W to 90W, offering versatile control across the product line.

The DTneo+ ballast supports wireless control via CRMX LumenRadio and Bluetooth.

Optional: DLPS15-100 AC/V-Mount adapter (select from the button option above).

[TABS]

KEY FEATURES

PHOTOMETRICS

Photometrics of the DLED3N-BI are identical to the DLED3-BI light head.

BALLAST

KEY FEATURES

• DMX on all DTneo ballasts
• Smooth dimming, with 16-bit control via DMX/RDM
• Wireless control (DTneo+ model) via Bluetooth and CRMX LumenRadio
• Auto-sensing for different light heads
• Supports DC battery or AC operation
• Flicker-free operation up to 50,000 fps
• OLED display with an intuitive menu
• Future-proof with firmware upgradeability

Suggested Accessories

• DPOWN-3: 9' ballast-to-head extension cable
• DPOWN-10: 33' ballast-to-head extension cable

ACCESSORIES

• DP1.2S: Imager projector with 85mm lens (updated version of DP1.1S)
• DP2.2S: Shutter projector with 85mm lens (updated version of DP2.1S)
• DPBA-610: Parallel Beam Intensifier (up to 440% increase in spot intensity)
• DLWARS: Wide-angle lens adapter with rotating barn doors (shifts beam range from 54° to 90°)

Search for all "S" Size accessories for use with the DLED3N!

[/TABS]