(SPECIAL ORDER LIGHT HEAD)

REQUIREMENTS FOR OPERATION:

• DTneo or DTneo+ Ballast (V-Mount DC use only)
• DPOWN, DPOWN-3 or DPOWN-10 Series Light Head Cable
• FOR AC USE - Add DLPS15-100 Adapter

DLED3N-BI-UV - Bi-Ultraviolet 365nm - 400nm Tunable LED Light Head

The Dedolight NEO DLED3N-BI-UV specialty light head is built for professionals who need tunable bi-ultraviolet spectrums in a single light head. This light outputs tunable bi-ultraviolet wavelengths between 365nm to 400nm while remaining tiny for transport (17.5oz). Three variations of specialty spectrum of DLED3N models can easily fit into a carry-on bag with their DTneo ballasts. Like its predecessor, the DLED3-BI-UV, this light draws a constant 40W of power from the DTneo ballast to power both wavelength of ultraviolet diodes chips on the set. Just because this light head is specialty doesn't mean it changes is natural focusing ability from 8° spot to 50° flood. The focusing range offers a wide mW/cm² ratio in various flood/spot positions. The light delivers the maximum emission offered in its power rating and class while remaining a passively cooled light. Wether the light is being used for forensics/medical and scientific purposes, or for specialty photography and black light work, some UV protection is recommended (eyes and skin coverage). The updated NEO 3 housing has a pigtail head cable connector, and is compatible with all "S" size accessories from the DLED2 and DLED3 series.

Unlike open-faced LED lights that require beam-shaping accessories to get a fixed beam angle, Dedolight LED focusing lights provide a manual focusing range of 50° to 5° (1:10 ratio) straight out of the box. The new NEO 3 housing has a pigtail head cable connector, and is compatible with all "S" size accessories from the DLED2 and DLED3 series.

POSSIBLE APPLICATIONS:

• Criminology
• Mineralogy and gemology
• Fluorescent Black lighting for photography
• UV active deco material
• Magic ink Edding UV marker
• Machine vision systems
• Document authentication
• Criminology
• Fluorescent microscopy
• Art history curation
• Non-destructive material analysis
• Photo-degradation studies

Difference Between DLED2N and DLED3N

Both the DLED2N and DLED3N light heads share the same housing and operate with DTneo or DTneo+ ballasts, using the same accessories. The difference lies in the power output: the DLED2N is a 20W light head, while the DLED3N is 40W. The DLED3N generates more heat with more diodes added making it an actively cooled light. While nearly silent, the larger COB results in more punch. The DLED2N, on the other hand, offers a bit more optimization on the beam side and longer use in a DC setup.

DTneo Ballast

The DTneo series simplifies control compared to the previous DT3 series. The DTneo and DTneo+ ballasts offer AC/DC operation, a V-mount plate for battery use, and DMX as a standard feature. The optional AC adapter electronics are housed in a snap-on V-mount battery shell.

The beauty in the DTneo is its auto-detection of which Neo light head model its connected to. If connected to a mono or bi-color light, if identifies the necessary controls and presents them to the user. Use the push/turn knob and OLED display to select between linear or exponential dimming curves, or change color seamlessly without drifting—even at very low dimming levels (0.1 to 100% dimming range). Choose between 8-bit linear or 16-bit advanced control via DMX/RDM protocol, and shoot up to 50,000 fps flicker-free using the high-speed setting. The DTneo ballast is future-proof, with user-upgradable software via USB, and can drive all Neo light heads from 20W to 90W, offering versatile control across the product line.

The DTneo+ ballast supports wireless control via CRMX LumenRadio and Bluetooth.

[TABS]

KEY FEATURES

PHOTOMETRICS

Photometrics of the DLED3N-BI are identical to the DLED3-BI light head.

BALLAST

KEY FEATURES

• DMX on all DTneo ballasts
• Smooth dimming, with 16-bit control via DMX/RDM
• Wireless control (DTneo+ model) via Bluetooth and CRMX LumenRadio
• Auto-sensing for different light heads
• Supports DC battery or AC operation
• Flicker-free operation up to 50,000 fps
• OLED display with an intuitive menu
• Future-proof with firmware upgradeability

Suggested Accessories

• DPOWN-3: 9' ballast-to-head extension cable
• DPOWN-10: 33' ballast-to-head extension cable

ACCESSORIES

• DP1.2S: Imager projector with 85mm lens (updated version of DP1.1S)
• DP2.2S: Shutter projector with 85mm lens (updated version of DP2.1S)
• DPBA-610: Parallel Beam Intensifier (up to 163% increase in spot intensity)
• DLWARS: Wide-angle lens adapter with rotating barn doors (shifts beam range from 54° to 90°)

Search for all "S" Size accessories for use with the DLED3N!

[/TABS]