REQUIREMENTS FOR OPERATION:

• DTneo or DTneo+ Ballast (V-Mount DC use only)
• DPOWN, DPOWN-3 or DPOWN-10 Series Light Head Cable
• FOR AC USE - Add DLPS15-100 Adapter

DLED3N-T - Dedicated 3200K LED Light Head

The Dedolight NEO DLED3N-T light head features the purest of temperatures by dedicating all diodes on the COB to 3200K. Weighing in at a mere 17.6oz, three of these powerful lights can easily fit into a carry-on bag with their DTneo ballasts. Like its predecessor, the DLED3-T, this light draws a constant 40W of power from the DTneo ballast and has the same beam qualities and output. This means the light delivers the maximum punch offered in tungsten its power rating and class. The light has a broad output ratio with a focusing range of 50° to 6° focusing range. With the single color chip, accessories like the DPBA-610 Beam Intensifier are even more optimized, and color remains stable in the lowest regions for an LED chip. 

Unlike open-faced LED lights that require beam-shaping accessories to get a fixed beam angle, Dedolight LED focusing lights provide a manual focusing range of 50° to 5° (1:10 ratio) straight out of the box. The new NEO 3 housing has a pigtail head cable connector, and is compatible with all "S" size accessories from the DLED2 and DLED3 series.

Difference Between DLED2N and DLED3N

Both the DLED2N and DLED3N light heads share the same housing and operate with DTneo or DTneo+ ballasts, using the same accessories. The difference lies in the power output: the DLED2N is a 20W light head, while the DLED3N is 40W. The DLED3N generates more heat with more diodes added making it an actively cooled light. While nearly silent, the larger COB results in more raw punch. The DLED2N, on the other hand, offers a bit more optimization on the beam side and longer use in a DC setup.

DTneo Ballast

The DTneo series simplifies control compared to the previous DT3 series. The DTneo and DTneo+ ballasts offer AC/DC operation, a V-mount plate for battery use, and DMX as a standard feature. The optional AC adapter electronics are housed in a snap-on V-mount battery shell.

The beauty in the DTneo is its auto-detection of which Neo light head model its connected to. If connected to a mono or bi-color light, if identifies the necessary controls and presents them to the user. Use the push/turn knob and OLED display to select between linear or exponential dimming curves, or change color seamlessly without drifting—even at very low dimming levels (0.1 to 100% dimming range). Choose between 8-bit linear or 16-bit advanced control via DMX/RDM protocol, and shoot up to 50,000 fps flicker-free using the high-speed setting. The DTneo ballast is future-proof, with user-upgradable software via USB, and can drive all Neo light heads from 20W to 90W, offering versatile control across the product line.

The DTneo+ ballast supports wireless control via CRMX LumenRadio and Bluetooth.

[TABS]

KEY FEATURES

PHOTOMETRICS

Photometrics of the DLED3N-T are 18% less output than the DLED3-D light head data seen here.

BALLAST

KEY FEATURES

• DMX on all DTneo ballasts
• Smooth dimming, with 16-bit control via DMX/RDM
• Wireless control (DTneo+ model) via Bluetooth and CRMX LumenRadio
• Auto-sensing for different light heads
• Supports DC battery or AC operation
• Flicker-free operation up to 50,000 fps
• OLED display with an intuitive menu
• Future-proof with firmware upgradeability

Suggested Accessories

• DPOWN-3: 9' ballast-to-head extension cable
• DPOWN-10: 33' ballast-to-head extension cable

ACCESSORIES

• DP1.2S: Imager projector with 85mm lens (updated version of DP1.1S)
• DP2.2S: Shutter projector with 85mm lens (updated version of DP2.1S)
• DPBA-610: Parallel Beam Intensifier (up to 163% increase in spot intensity)
• DLWARS: Wide-angle lens adapter with rotating barn doors (shifts beam range from 54° to 90°)

Search for all "S" Size accessories for use with the DLED3N!

[/TABS]