(SPECIAL ORDER LIGHT HEAD)

REQUIREMENTS FOR OPERATION:

• DTneo or DTneo+ Ballast (V-Mount DC use only)
• DPOWN, DPOWN-3 or DPOWN-10 Series Light Head Cable
• FOR AC USE - Add DLPS15-100 Adapter

DLED4N-UV400 - Dedicated 400nm UV LED Light Head

The Dedolight NEO DLED4N-UV400 specialty light head is built for professionals who need all the emission from the light dedicated to the 400nm UV wavelength. A variation of three specialty light heads, along with three DTneo ballasts and accessories can fit into a medium sized rolling hard case. Like its predecessor, the DLED4-UV400, this light draws a constant 40W of power from the DTneo ballast to power 40w of ultraviolet diodes. Just because this light head is specialty doesn't mean it changes is natural focusing ability from 60° - 4°. The focusing range offers a larger mW/cm² concentrated at the dedicated wavelength and in various flood/spot positions. The light delivers the maximum emission offered in its power rating and class while remaining a passively cooled light. Wether the light is being used for forensics/medical and scientific purposes, or for specialty photography and black light work, some UV protection is recommended (eyes and skin coverage). The DLED4N light head also features some new housing updates: it is shorter front to back as the chassis connector is relocated to the bottom. The back casing redesign cuts down light leaks even further as well. 

POSSIBLE APPLICATIONS:

• Criminology
• Mineralogy and gemology
• Fluorescent Black lighting for photography
• UV active deco material
• Magic ink Edding UV marker
• Machine vision systems
• Document authentication
• Criminology
• Fluorescent microscopy
• Art history curation
• Non-destructive material analysis
• Photo-degradation studies

Difference Between DLED4N and DLED7N

Both the DLED4N and DLED7N light heads share the same housing and operate with DTneo or DTneo+ ballasts, using the same accessories. The difference lies in the power output and beam optimization: the DLED4N is a 40W light head, while the DLED7N is 80W. With more diodes added the DLED7N generates more heat making it an actively cooled light. While nearly silent, the larger DLED7N COB results in more raw punch. On the other hand, with a smaller COB, the DLED4N is passively cooled, perfectly silent, with more optimization on the beam range, quality and considerably longer use in a DC setup.

DTneo Ballast

The DTneo series simplifies control compared to the previous DT4 series. The DTneo and DTneo+ ballasts offer AC/DC operation, a V-mount plate for battery use, and DMX as a standard feature. The optional AC adapter electronics are housed in a snap-on V-mount battery shell.

The beauty in the DTneo is its auto-detection of which Neo light head model its connected to. If connected to a mono or bi-color light, if identifies the necessary controls and presents them to the user. Use the push/turn knob and OLED display to select between linear or exponential dimming curves, or change color seamlessly without drifting—even at very low dimming levels (0.1 to 100% dimming range). Choose between 8-bit linear or 16-bit advanced control via DMX/RDM protocol, and shoot up to 50,000 fps flicker-free using the high-speed setting. The DTneo ballast is future-proof, with user-upgradable software via USB, and can drive all Neo light heads from 20W to 90W, offering versatile control across the product line.

The DTneo+ ballast supports wireless control via CRMX LumenRadio and Bluetooth.

[TABS]

KEY FEATURES

BALLAST

KEY FEATURES

• DMX on all DTneo ballasts
• Smooth dimming, with 16-bit control via DMX/RDM
• Wireless control (DTneo+ model) via Bluetooth and CRMX LumenRadio
• Auto-sensing for different light heads
• Supports DC battery or AC operation
• Flicker-free operation up to 50,000 fps
• OLED display with an intuitive menu
• Future-proof with firmware upgradeability

Suggested Accessories

• DPOWN-3: 9' ballast-to-head extension cable
• DPOWN-10: 33' ballast-to-head extension cable

ACCESSORIES

• DP1.2: Imager projector with 85mm lens (updated version of DP1.1)
• DP2.2: Shutter projector with 85mm lens (updated version of DP2.1)
• DPBA-714: Parallel Beam Intensifier (up to 242% increase in spot intensity)
• DLWARS: Wide-angle lens adapter with rotating barn doors (shifts beam range from 54° to 90°)

Search for all "M" Size accessories for use with the DLED4N!

[/TABS]