We have limited quantities of this MASSIVE promo on a single DLH400D light set; the famous 400/575w HMI focusing light head with the DEB400D electronic ballast. The set also includes head and mains cables, basically everything you need to get the light up and running. See the option above to have Dedo Cali build out a hard case for you.
LIGHT SET INCLUDES:
- DLH400DT light head
- DEB400DT-HS-U1 - Electronic ballast, switchable from regular to 1000Hz, high-speed
- DPOW400DT Head cable
- DPLS400 - Light shield ring
- DBD400 - 8-leaf barn door
- DL400DHR-NB - 400/575w Daylight Balanced Lamp
- DCAB3IEC - US AC mains cable
NOTE: See optional hard case options above. With this option Dedolight California customizes the case to fit the light set. By default the case is not a part of the set.
[TABS]
ABOUT
The 400w HMI focusing light head by dedolight is a pure pleasure to use. Like all its relatives, double aspheric lensing creates the cleanest and most controllable beam in it's class. Most are not used to the range this popular light head size can achieve without additional accessories. This light has a native flood to spot range of 50°- 4.5°, and a focal intensity ratio of 1:20. This is a native function of the light by simply turning the focusing knob. Add up all the time saved it takes to change attachments on your tradition 400w HMI to get a new beam angle and this light gives you that time back. Most don't know that this light can also be operated with a tungsten ceramic HMI lamp as well which has four times the output of traditional tungsten lamps. Using either lamp, the light can be switched at the flicker-free DEB400DT electronic control ballast from 400w to 575w, and dimmed up to 40%. Beyond the native light is the slew of optional attachment which don't require tools to add and only take a few seconds to apply. If you are used to using another projection system with another 400w HMI light, you MUST see this with it's DP400 projector, or the DPBA-1419 Intensifier (528% increase in output in a tight, parallel spot) before you ever buy another 400w HMI light system.
KEY FEATURES
Color Temperature |
Lamp # DL400DHR-NB, 400w for daylight, single ended, Hot re-strike, H Type HMI lamp |
Focus Control |
50°- 4.5° (1:20) - (With optional DLWAR optical aspheric wide-angle attachment, take the wide angle from 50°- 85°)
|
Cooling |
Passive silent cooling |
Mounting |
Dual 5/8" (16mm) vertical or horizontal receptacles or 1 1/8" stud |
Operating Position |
Any position |
Tilt Control |
Tightening knob |
Safety |
Safety switch prevents operation when access door is open |
Weight |
9.7 lbs (4400g) |
UV |
Double UV Lens protection - lowest UV of any comparable light source! |
PHOTOMETRICS
BALLAST
DEB400DT
Dimming |
up to 40% |
Power |
400/575w |
Input Voltage |
Automatic sensing 90 - 264 V AC
|
Display |
LED status indicators (Ready, Lamp, Heat)
|
Protections Class |
IP20
|
Size |
9.3" x 5" x 5"
|
Weight |
7.5 lbs
|
Cables |
DPOW400D Head cable - 23', DCAB3A-SW mains - 16.4'
|
Key Features |
- Optional High Speed switch (1000Hz)
- Active power factor correction (PFC)
- Overload protection
- Surge Protection
- Hot re-strike
|
SUGGESTIONS:
- DEB400H - Ballast-to-stand holder
- 0CADL400T-OS-F: 400/575W HMI Tungsten 3400K Lamp.
ACCESSORIES
- DWAFX400 - Directional Beam Spreader Filter
- DLWA400R - Wide Angle Aspheric Lens Adapter
- DP400KU - Imager projector, universal kit with 185mm lens
- DP400FS - Framing shutter assembly for DP400 projector
- DPBA-14 - Parallel Beam Intensifier (101% more light, 4.5° beam)
- DPBA-1419 - Parallel Beam Intensifier (528% more light, 5° beam)
Search for all A Size accessories to build-out your DLH400DT!
[/TABS]