This is a complete set of the elements needed to operate a 5', 500w bi-color Ledraptor5 soft light from dedolight. We call these lights "portable windows" for providing a gorgeous diffused light quality which wraps around objects without any hotspots. They are built to travel and take under 5 minutes to fully assemble for a beginner (our record for the 7' model is under a 80 seconds). The octo-dome textile reflector has two optional diffusion layers (baffle and front diffuser), and is wide and shallow allowing for rigging in tighter locations. The dedolight Ledraptor5 has a total of four diode sets in two separate arrays. Each array is getting a constant 220w of power so regardless of what diodes are active between the optional 2700K - 6500K color range, you are always getting the most from the diodes. We call this a "2x 2x 220w". What this does is make certain that when you transition to tungsten you won't see a dramatic dip in light.
SET INCLUDES:
- DLRAP5-BI - Ledraptor5 - LED soft light bi-color 500W,
- DT20-BI - Ballast with AC mains cable.
- DPOW20 Head cable
- Panaura 5' Textile reflective soft dome
- 5' front diffuser
- Inner baffle
(See option for adding the DLPA5G - 40° grid / egg crate)
[TABS]
FEATURES
Color Temperature |
Continuous adjustment from 2700-6500k |
Power |
Max power consumption 500w, alternating between two, 220w light sources (2x - 2x 220w) |
Cooling |
Active, silent fan and liquid cooling |
Mounting |
Dual 5/8" (16mm) vertical or horizontal receptacles, or 1-1/8" (28mm) stud
|
Operating Position |
Any position |
Soft Box Size |
5' outer diameter |
Tilt Control |
Friction knob |
Safety |
IP40 |
Weight |
11.5 |
UV |
No UV radiation |
PHOTOMETRICS
BALLAST
DT20-BI
Dimming |
Continuous - 0 - 100% |
Max Power |
500w |
Input Voltage |
90 - 264 V AC
|
Display |
Digital display for dimming "0-99", and DMX
|
DMX Control |
5 pin XLR input and output, auto terminating |
Protections Class |
SELV, Protection Class I, IP20
|
Size |
17.3 x 5.8 x 2.6"
|
Weight |
11.5 lbs
|
Cables |
DPOW20 Head cable - 23', DCAB3A-SW mains - 16.4'
|
SUGGESTED ACCESSORIES:
- Extend another 23' with the DPOW20 head to ballast cable
- DEB400H - Ballast Holder for light stand
ABOUT
A soft light should embrace and not punch. It's our opinion that if soft light is what you want, then a dedicated system to do just that is what you should use. The Ledraptor series of soft lights are engineered specifically for pushing light to the outer edges of the dome. That's why our soft lights have 225% more light on the outside edges than the competition. They are built to travel (recommend adding the optional cases) and take under 5 minutes to fully assemble without practice (our record for the 7' model is under a 80 seconds). The octo-dome textile reflector has two optional diffusion layers (inner baffle and front diffuser), and is wide and shallow allowing rigging in tighter locations. The 5ft system fully deployed is only 57" deep (front to back of the fixture). Try these lights out and you'll see why we call them our "portable windows".
ACCESSORIES
- DLPA5G - 40° grid / egg crate for 5' Octodome
- DEB400H - Ballast Holder for light stand
- DSCPA5 - Soft Travel Case
[/TABS]