REQUIREMENTS FOR OPERATION:

• DTneo or DTneo+ Ballast (V-Mount DC use only)
• DPOWN, DPOWN-3 or DPOWN-10 Series Light Head Cable
• FOR AC USE - Add DLPS15-100 Adapter

DLED2N-BI - Bi-color 2700K - 6600K LED Light Head

The Dedolight NEO DLED2N-BI light head balances beam quality, output and the most commonly used ambient color temperatures in the small size dedolight housing. These lights can fit into a coffee mug - three of them can easily fit into a carry-on bag with their DTneo+ ballasts. Like its predecessor, the DLED2-BI, this light draws a constant 20W of power from the DTneo ballast by alternating between 20w of tungsten and 20w of daylight diodes. This means the light delivers full 20W output at all times, rather than splitting power between colors. This light has amazing light ratios for a mixed bi-color LED light with a focusing grange of focusing range of between 50° to 5° (1:7 light output ratio), something only possible because of dedolight aspheric optics. The DLED2N-BI light head features the same beam quality and output as its predecessor, but reaches deeper color stability and range with the DTneo ballast. The updated housing has a pigtail head cable connector, and is compatible with all "S" size accessories from the DLED2 and DLED3 series. The light is passively cooled for absolute silent operation. 

Fine-point dedolight sources are unique lighting tools. Unlike open-faced LED lights that require beam-shaping accessories to get achieve a single fixed beam angle, Dedolight LED focusing lights provide a a wide focusing straight out of the box. Along with superior beam quality, and the level of control achievable with Neo ballasts, these focusing tools are just getting stronger. 

DLED2N versus DLED3N

Both the DLED2N and DLED3N light heads share the same housing, operate with DTneo or DTneo+ ballasts and use the same accessories. The difference lies in the power output and beam ratios: the DLED2N is a 20W light head, while the DLED3N is 40W. The DLED2N generates less heat, allowing for passive cooling. Since it fits a smaller COB than the DLED3N unit the results show in a broader focusing range and improved light ratios. Lowering the power also allows it to be powered double the time of a DLED3N in a DC setup. The DLED3N, on the other hand, offers more raw punch all around, including use with S-size accessories which they both share.  

DTneo Ballast

The DTneo series simplifies control compared to the previous DT2 series. The DTneo and DTneo+ ballasts offer AC/DC operation, a V-mount plate for battery use, and DMX as a standard feature. The optional AC adapter electronics are housed in a snap-on V-mount battery shell.

The beauty in the DTneo is its auto-detection of which Neo light head model its connected to. If connected to a mono or bi-color light, if identifies the necessary controls and presents them to the user. Use the push/turn knob and OLED display to select between linear or exponential dimming curves, or change color seamlessly without drifting—even at very low dimming levels (0.1 to 100% dimming range). Choose between 8-bit linear or 16-bit advanced control via DMX/RDM protocol, and shoot up to 50,000 fps flicker-free using the high-speed setting. The DTneo ballast is future-proof, with user-upgradable software via USB, and can drive all Neo light heads from 20W to 90W, offering versatile control across the product line.

The DTneo+ ballast supports wireless control via CRMX LumenRadio and Bluetooth.

[TABS]

KEY FEATURES

PHOTOMETRICS

Photometrics of the DLED2N-BI are identical to the DLED2-BI light head.

BALLAST

KEY FEATURES

• DMX on all DTneo ballasts
• Smooth dimming, with 16-bit control via DMX/RDM
• Wireless control (DTneo+ model) via Bluetooth and CRMX LumenRadio
• Auto-sensing for different light heads
• Supports DC battery or AC operation
• Flicker-free operation up to 50,000 fps
• OLED display with an intuitive menu
• Future-proof with firmware upgradeability

Suggested Accessories

• DPOWN-3: 9' ballast-to-head extension cable
• DPOWN-10: 33' ballast-to-head extension cable

ACCESSORIES

• DP1.2S: Imager projector with 85mm lens (updated version of DP1.1S)
• DP2.2S: Shutter projector with 85mm lens (updated version of DP2.1S)
• DPBA-610: Parallel Beam Intensifier (up to 500% increase in spot intensity)
• DLWARS: Wide-angle lens adapter with rotating barn doors (shifts beam range from 54° to 90°)

Search for all "S" Size accessories for use with the DLED2N!

[/TABS]