Basic Set Includes:

• DLED2N-BI: 20W bi-color LED focusing light head
• DTneo+: DC control ballast with V-mount socket
• DPOWN: 4' head cable
• DBDS8: 8-leaf barn door
• DPLSS: Light shield ring

PLEASE NOTE: The optional DLPS15-100 AC/DC V-Mount AC adapter for the ballast is selectable above.

DLED2N-BI Light Head

The Dedolight NEO DLED2N-BI light head maximizes beam quality versus power consumption while fitting in the smallest of spaces. Three of these lights can easily fit into a carry-on bag with their DTneo+ ballasts. Like its predecessor, the DLED2-BI, this light draws a constant 20W of power from the DTneo ballast by alternating and blending between a 20w tungsten set and a 20W daylight set. This means the light delivers full 20W output at all times, rather than splitting power 10w and 10w between two LED sets. It has amazing light ratios for a mixed bi-color LED light with a native focusing range from 50° to 5° (with a 1:7 output ratio), something only possible because of dedolight's unique aspheric optics.

Unlike open-faced LED lights which require beam-shaping accessories to get simply a fixed beam angle, Dedolight LED focusing lights provide a wide, manual focusing range straight out of the box. The DLED2N-BI light head features the same beam quality and output as its predecessor, and now coupled together with the universal DTneo ballast it takes control to new levels. The new dedolight Neo 2 housing has a pigtail head cable connector, and is compatible with all "S" size accessories from the DLED2 and DLED3 series.

Difference Between DLED2N and DLED3N

Both the DLED2N and DLED3N light heads share the same housing and operate with DTneo or DTneo+ ballasts. They access the same S-size accessories. The difference lies in the power consumption: the DLED2N is a 20W light head, while the DLED3N is 40W. With that, the DLED2N generates less heat, allowing for passive cooling and longer DC use cases. The DLED2N also has a slightly broader focusing range and light ratios then the DLED3N. The DLED3N, on the other hand, is actively cooled and offers more raw punch for those who need more output.

DTneo+ Ballast

The DTneo series simplifies control compared to the previous DT2 series. The DTneo and DTneo+ ballasts offer AC/DC operation, a V-mount plate for battery use, and DMX as a standard feature. The optional AC adapter electronics are housed in a snap-on V-mount battery shell.

Use the push/turn knob and OLED display to select between linear or exponential dimming curves, or change color seamlessly without drifting—even at dimming levels below 5%. Choose between 8-bit linear or 16-bit advanced control via DMX/RDM protocol, and shoot up to 50,000 fps flicker-free using the high-speed setting. The DTneo ballast powers all dedolight Neo light heads between 20W to 90W, offering universal versatility control across the entire product line.

The DTneo+ ballast supports wireless control via CRMX LumenRadio and Bluetooth.

[TABS]

KEY FEATURES

PHOTOMETRICS

Photometrics of the DLED2N-BI are identical to the DLED2-BI light head.

BALLAST

KEY FEATURES

• DMX on all DTneo ballasts
• Smooth dimming, with 16-bit control via DMX/RDM
• Wireless control (DTneo+ model) via Bluetooth and CRMX LumenRadio
• Auto-sensing for different light heads
• Supports DC battery or AC operation
• Flicker-free operation up to 50,000 fps
• OLED display with an intuitive menu
• Future-proof with firmware upgradeability

Suggested Accessories

• DPOWN-3: 9' ballast-to-head extension cable
• DPOWN-10: 33' ballast-to-head extension cable

ACCESSORIES

• DP1.2S: Imager projector with 85mm lens (updated version of DP1.1S)
• DP2.2S: Shutter projector with 85mm lens (updated version of DP2.1S)
• DPBA-610: Parallel Beam Intensifier (up to 500% increase in spot intensity)
• DLWARS: Wide-angle lens adapter with rotating barn doors (shifts beam range from 54° to 90°)

Search for all "S" Size accessories for use with the DLED2N!

[/TABS]