(SPECIAL ORDER LIGHT HEAD)
REQUIREMENTS FOR OPERATION:
- DTneo or DTneo+ Ballast (V-Mount DC use only)
- DPOWN, DPOWN-3 or DPOWN-10 Series Light Head Cable
- FOR AC USE - Add DLPS15-100 Adapter
DLED3N-GL520 - Dedicated 520nm "Pure Green" Light Head
The Dedolight NEO DLED3N-GL520 light head dedicates output in the 520nm pure green visible wavelength while remaining tiny for transport (17.5oz). Three variations of specialty spectrum of DLED3N models can easily fit into a carry-on bag with their DTneo ballasts. Like all dedolight focusing systems, this light head has a focusing range from 5° spot to 50° flood. The focusing range offers a wide output ratio in the various flood/spot positions. The light delivers the maximum output offered in its power rating and class while remaining passively cooled. Use cases for this light are for science, forensics, medical, horticulture, or for specialty photography. Visible green and can be used for studio purposes as well. The updated NEO 3 housing has a pigtail head cable connector, and is compatible with all "S" size accessories from the DLED2 and DLED3 series.
Unlike open-faced LED lights that require beam-shaping accessories to get achieve any beam control, Dedolight DLED3N focusing light has a manual focusing range of between 50° to 5° (1:10 ratio) straight out of the box. Along with superior beam quality, and the level of control achievable with Neo ballasts, these focusing tools are just getting stronger.
POSSIBLE APPLICATIONS:
- Criminology
- Fluorescent microscopy
- Horticulture / photosynthesis
- Art history curation
- Non-destructive material analysis
Difference Between DLED2N and DLED3N
Both the DLED2N and DLED3N light heads share the same housing, operate with DTneo or DTneo+ ballasts and use the same accessories. The difference lies in the power output and beam ratios: the DLED2N is a 20W light head, while the DLED3N is 40W. The DLED2N generates less heat, allowing for passive cooling, resulting in a broader focusing range and improved light ratios. Lowering the power also allows it to be powered double the time of a DLED3N. The DLED3N, on the other hand, offers more output.
DTneo Ballast
The DTneo series simplifies control compared to the previous DT3 series. The DTneo and DTneo+ ballasts offer AC/DC operation, a V-mount plate for battery use, and DMX as a standard feature. The optional AC adapter electronics are housed in a snap-on V-mount battery shell.
The beauty in the DTneo is its auto-detection of which Neo light head model its connected to. If connected to a mono or bi-color light, if identifies the necessary controls and presents them to the user. Use the push/turn knob and OLED display to select between linear or exponential dimming curves, or change color seamlessly without drifting—even at very low dimming levels (0.1 to 100% dimming range). Choose between 8-bit linear or 16-bit advanced control via DMX/RDM protocol, and shoot up to 50,000 fps flicker-free using the high-speed setting. The DTneo ballast is future-proof, with user-upgradable software via USB, and can drive all Neo light heads from 20W to 90W, offering versatile control across the product line.
The DTneo+ ballast supports wireless control via CRMX LumenRadio and Bluetooth.
[TABS]
KEY FEATURES
| Color Temperature |
Dedicated pure green 520nm LED diode |
| Power |
Max power consumption: 40W |
| Focus Control |
50°-5° with double helix focusing control (3/4 turns). With optional DLWARS lens: 54°-90° |
| Cooling |
Passive silent cooling |
| Mounting |
Dual 5/8" (16mm) vertical/horizontal receptacles or 1-1/8" (28mm) stud |
| Operating Position |
Any position |
| Accessory Holder |
"S" size accessories - 2.3" (58mm) |
| Tilt Control |
Permanent friction |
| Safety |
Protection Class III, SLEV, IP20 |
| Weight |
1.1 lb (17.5oz) |
| UV |
No UV radiation |
BALLAST
| Dimming |
Linear or exponential curve settings; dimming from 0.1% to 100% |
| Max Power |
83 W |
| Power Supply |
14.8V battery or snap-on AC/DC V-Mount adapter (DLPS15-100) |
| Input Voltage |
15V DC (12-18V) |
| Color Control |
Continuous adjustment control - auto-detected to connected Neo light model |
| Display |
OLED screen |
| Size |
6.87" x 3.62" x 2.5" |
| Weight |
1.25 lbs |
| DMX |
XLR5 (DMX512-A) 8/16 Bit |
| Wireless |
DTneo+ model only: Bluetooth mesh / CRMX / RDM |
KEY FEATURES
- DMX on all DTneo ballasts
- Smooth dimming, with 16-bit control via DMX/RDM
- Wireless control (DTneo+ model) via Bluetooth and CRMX LumenRadio
- Auto-sensing for different light heads
- Supports DC battery or AC operation
- Flicker-free operation up to 50,000 fps
- OLED display with an intuitive menu
- Future-proof with firmware upgradeability
Suggested Accessories
- DPOWN-3: 9' ballast-to-head extension cable
- DPOWN-10: 33' ballast-to-head extension cable
-
DLPS15-100 - AC adapter for DTneo ballasts
ACCESSORIES
- DPLS: light management ring for additional accessory use
- DBD8: 8-leaf barn door
- DLWARS: Wide-angle lens adapter with rotating barn doors (shifts beam range from 54° to 90°)
Search for all "S" Size accessories for use with the DLED3N!
[/TABS]
