My shopping cart
Your cart is currently empty.
Continue ShoppingSALES IN US ONLY. CALL OR EMAIL TO SCHEDULE IN STUDIO DEMOS. Expect fulfillment delays for some orders.
PLEASE NOTE: The option to add the DLPS15-100 AC/DC V-Mount adapter for the ballast available above.
The Dedolight NEO DLED4N-BI light head beautifully blends bi-color output in the popular "M" size dedolight light head size. The "M" size light head is in the same scale as a classic 150w DLH4 unit, making it the most popular LED size dedolight to build kits from. Three of these light heads, along with three DTneo ballasts, can fit into a medium sized rolling hard case. Like its predecessor, the DLED4-BI, this light draws a constant 40W of power from the DTneo ballast by alternating between sets of 40w tungsten LEDs and 40w daylight LED's mixed in the COB. This means the light delivers full 40W output at all times rather than splitting 20w and 20w power between colors (and calling it a 40w light head). Thanks to the DTneo ballast, the NEO version of the DLED4N brings deeper color integrity in lower dimming ranges and in dimming than its predecessor was capable of. The DLED4N-BI light head also features some new housing updates as the chassis connector is relocated to the bottom of the light head. The back casing redesign cuts down light leaks even further as well.
Both the DLED4N and DLED7N light heads share the same housing and operate with DTneo or DTneo+ ballasts, using the same accessories. The difference lies in the power output and beam optimization: the DLED4N is a 40W light head, while the DLED7N is 80W. With more diodes added to the DLED7N, it generates more heat making it an actively cooled light. While nearly silent, the larger COB results in more punch. On the other hand, with a smaller COB, the DLED4N is passively cooled offering more optimization on the beam range and considerably longer use in a DC setup. Due to its beam quality the DLED4N unit also has broader light ratios when using optical accessories like the DPBA-714 unit.
The DTneo series simplifies control compared to the previous DT4 series. The DTneo and DTneo+ ballasts offer AC/DC operation, a V-mount plate for battery use, and DMX as a standard feature. The optional AC adapter electronics are housed in a snap-on V-mount battery shell.
The beauty in the DTneo is its auto-detection of which Neo light head model its connected to. If connected to a mono or bi-color light, if identifies the necessary controls and presents them to the user. Use the push/turn knob and OLED display to select between linear or exponential dimming curves, or change color seamlessly without drifting—even at very low dimming levels (0.1 to 100% dimming range). Choose between 8-bit linear or 16-bit advanced control via DMX/RDM protocol, and shoot up to 50,000 fps flicker-free using the high-speed setting. The DTneo ballast is future-proof, with user-upgradable software via USB, and can drive all Neo light heads from 20W to 90W, offering versatile control across the product line.
The DTneo+ ballast supports wireless control via CRMX LumenRadio and Bluetooth.
Optional: DLPS15-100 AC/V-Mount adapter (select from the button option above).
[TABS]
Color Temperature | Continuous adjustment from 2700K to 6600K |
Power | Max power consumption: 40W, alternating between two 40W diode sources (2x 40W) |
Focus Control | 60°-4° (1:12 ratio) with double helix focusing control (3/4 turns). With optional DLWARS lens: 54°-84° (1:21 ratio) |
Cooling | Passive silent cooling |
Mounting | Dual 5/8" (16mm) vertical/horizontal receptacles or 1-1/8" (28mm) stud |
Operating Position | Any position |
Accessory Holder | "M" size accessories - 3" (76mm) |
Tilt Control | Permanent friction |
Safety | Protection Class III, SLEV, IP20 |
Size | W - 4.3" x L (flood) 6.38" L (Spot) 7.91" x H 7.2" (with extended yoke) |
Weight | 2.9 lbs |
UV | No UV radiation |
Photometrics of the DLED4N-BI are identical to the DLED4-BI light head.
CRI Ra | 97 |
CRI Re | 96 |
CCT | 3112K |
TLCI | 97 |
Dimming | Linear or exponential curve settings; dimming from 0.1% to 100% |
Max Power | 83 W |
Power Supply | 14.8V battery or snap-on AC/DC V-Mount adapter (DLPS15-100) |
Input Voltage | 15V DC (12-18V) |
Color Control | Continuous, smooth control - Auto detection adjusts to connected Neo light head model for mono or bi-color control settings as needed |
Display | OLED screen |
Size | 6.87" x 3.62" x 2.5" |
Weight | 1.25 lbs |
DMX | XLR5 (DMX512-A) 8/16 Bit |
Wireless | DTneo+ model only: Bluetooth mesh / CRMX / RDM |
Search for all "M" Size accessories for use with the DLED4N!
[/TABS]
Be the first to ask a question about this product.
Sign up for our mailing list to receive new product alerts, special offers, and workshop schedules.
© 2025 Dedolight California | Shopify Theme by Mile High Themes | Powered by Shopify