DLED7N-BI - dedolight NEO - WIRELESS, Bi-color light set with DTneo+ control ballast - (SETDLED7N+BI)
PLEASE NOTE THE OPTIONAL DLPS15-100 AC/DC V-Mount adapter for the ballast above!
The new dedolight NEO bi-color light set includes a DLED7N-BI 80w bi-color LED focusing light head, a DTneo+ control ballast (wireless version of the DTneo), DBD8 barn door, DPLS light shield ring and a 4 ft head cable.
THE DLED7N-BI LIGHT HEAD
The dedolight NEO DLED7N-BI is the perfect balance of output strength and control. Like its predecessor, the DLED7-BI, this light draws a constant 80w of power from the DTneo ballast by alternating between two 80w diode sets (tungsten and daylight) in its array. This means no matter what color diodes are on at any given time the light is always delivering the output you've paid for: not 40w on one color and 40w on the other, but 80W each. You might have experienced open-faced LED lights that require a beam-shaping accessory to get a fixed angle of exit and change the beam size. Moving the light from the subject is often impractical, time-consuming and sometimes impossible in tight spaces. Dedolight LED focusing lights are just not that: straight out of the box the light has a manual focusing range of 60°- 6° (1:10 light ratio). Think about zooming your light just like the Operator zooms the camera lens. Because you can set the exact beam size you want in seconds, dedolights are in a class of their own. If you know the DLED7 series well, the new dedolight NEO DLED7N has the same beam quality and output from its predecessor. The optical performance and functionalities are the same. The new dedolight Neo bi-color housing is shorter front to back as the chassis connector is relocated to the bottom. The back casing redesign cuts down light leaks even further. The DLED7N bi-color Neo light head is an incredible 30% shorter than the already compact DLED7-Bi. The DLED7N-bi Neo head is compatible with all the M size accessories of the DLED7-Bi, the Classic dedolights DLH4, DLHM4-300 and the HMI DLH200. So why would you choose a DLED7N Neo Bi-color over a DLED7-Bi Turbo: because of the superb dimming and smooth color changing below 10% and added functions to its controller: the DTNeo ballast.
THE DTNEO BALLAST
This is where the dedolight NEO series truly separates itself from its predecessor. Gone are the days when you needed to choose between an AC, AC+DMX or DC ballasts with the previous DLED series. The DTneo, and DTneo+ (wireless option) offer all the functions you wanted in a single ballast, and more. Starting with AC/DC operation, the DTneo is a DC ballast with a V-mount plate for battery operation. The optional AC adapter electronics is built inside a battery shell that looks like and snaps-on exactly like a V-mount battery. DMX is now a standard feature in all DTNeo ballasts. Use the simple push/turn knob and OLED displayed menu to select between a deep, smooth "linear" or "exponential" dimming curve, or seamlessly change color, without drifting- even below 10% output (0.1 to 100% dimming range). Take advantage of 1000-point 8-bit linear, or 16-bit advanced control (via DMX/RDM protocol). Select the high-speed setting to shoot up to 50,000fps flicker-free. In direct tradition with Dedolight long-lasting equipment, the DTNeo ballast hardware and software are future-proof. The software is user upgradable via USB. The DTneo ballasts have an auto-detect feature to recognize and drive all the upcoming DLEDNeo light heads between 20w-80w. That's not a typo. If you wish to invest for the future, the upcoming DLED3Neo unit, the DLED7Neo Infra-red, Ultra-Violet and even future generations of DLED7Neo, will all be controlled by the DTneo ballast, up to the Neo DLED9. To put it simply, the DTNeo ballast opens the world to an entire new generation of light heads, and the DLED7N-BI leads the party.
With the "DTneo+" version of the ballast you are unlocking the ability to use wireless control via CRMX LumenRadio and Bluetooth.
DLED7N-BI - 80w bi-color LED focusing light head
DTneo+ - DC control ballast with V-mount socket
DPOWN - 4' head cable
DBD8 - 8-leaf barn door
DPLS - Light shield ring
OPTIONAL - DLPS15-100 AC/V-Mount adapter (select from button option above)
Continuous adjustment from 2700-6500k
Max power consumption 80w, alternating between two 80w diode sources (2x 80w)
60°- 6° (1:10 ratio) - Double helix focusing control, moves body and head away from one another with 3/4 turns. (With optional DLWAR optical aspheric wide-angle attachment, shifts beam range from native to 54°-90°, 1:15 ratio.
Active silent cooling
Dual 5/8" (16mm) vertical or horizontal receptacles, or 1-1/8" (28mm) stud
3" (76mm) diameter
Protection Class III, SLEV, IP20
2.9 lb (1300g)
No UV radiation
Double the output in CCT ranges, broader focusing range and better shadows when compared to a full spectrum light head.
Linear or Exponential curve settings, smooth continuous dimming and color changing from 0.1 - 100%
83 W max
Only use with 14.8 V battery, or Snap-on AC/DC V-Mount adapter (DLPS15-100)
15 V DC (12-18V)
Continuous - 2700-6500k
OLED Display screen
6.87" x 3.62" x 2.5“
XLR5 (DMX512-A) 8/16 Bit
DTneo+ model only - Bluetooth mesh / CRMX / RDM
DMX on-board all DTneo ballasts
Perfectly smooth linear or exponential dimming (user-selectable), with 16-bit advanced control via DMX/RDM protocol. Manual or DMX step-free dimming range from 0.1% to full power
Wireless control via CRMX LumenRadio and Bluetooth (DTneo+ model)
Auto-sense the connected light head and automatically adjust the electronic settings and menu display
Interchangeable attachments for DC battery or AC operation
Features a normal speed flicker free mode, as well as a high speed flicker free mode up to 50,000fps
Simple, intuitive menu with an OLED display
Very power efficient electronics
Future-proof thanks to the Firmware upgradeability
Mounting hardware slide into the rugged aluminum housing
DPOWN-3 - 9' Ballast-to-head extension cable
DPOWN-10 - 33' ballast-to-head extension cable
Photometrics of the DLED7-BI are identical to the DLED7N-BI light head.