WEB LAUNCH - DLH652T Light Set - 300w, 500w, or 650w Tungsten dedolight (100v-240v)
If you love the character of tungsten light, there is still no substitute for an incandescent source, even in the age of LEDs. If you really love the uniqueness of tungsten light, you might decide to scrim the DLH652T or choose a bulb with lower lumen rating rather than dimming it down. The DLH652T is designed for this level of demanding work. If you cherish its beautiful beam but want control convenience, the DLH652T-DMX is your best fit. Both DLH652T models (with or without DMX) are extremely versatile, operating between 100-240VAC, with a choice of 650w, 500w or 300w lamps. These new dedolight tungsten heads are stand-alone AC power (no ballast required) delivering a superior beam quality and unrivaled focus range. If you are a Dedo 150w Classic user, you can imagine what its larger brother capacities are. Still, the DLH652T is the middle sibling of the dedolight tungsten family (the most powerful is the DLH1000T, 1000w). This is the reference light source every new fixture tries to match on a spectrum analyzer.
If you are a proud owner of a DLH400DT, the DLH652T light is its perfect tungsten companion: both use the same A-size accessories, including the DPBA-14 (65% more light), DPBA-1419 (320% more light = 1952fc at 12ft) and of course the DP400 projection system.
BASIC SET INCLUDES:
1x DLH652T light head with 1' built-in AC cable with bulkhead connector (requires included DCAB3A-SW-U extension/adapter cable)
1x DBD400 barn door
1x DPLS400 light ring
1x DL650FRK-NB - 650W 120v halogen lamp
1x DCAB3A-SW-U - US AC power extension/adapter cable with in-line switch (bulkhead to standard 3-prong AC), 16' - Call for upgrade to a waterproof in line switch.
Light Head weighs 9 lbs
"AC DIMMER" OPTION INCLUDES:
DLDIM2000-U - separate 110v In-line manual AC dimmer for DLH652T non-DMX head only.
NOTE: the DLDIM1000 are not suitable to operate the DLH652 with 120v AC.
"DMX" OPTION INCLUDES:
DLH652T-DMX Light head with integrate DMX onboard. Replaces DLH652T.
NOTE: The DLH652T-DMX can be dimmed manually or via DMX on the controller on the side of the fixture. It cannot be dimmed via an external dimmer.
Pelican Air 1557 with custom Trekpak insert.
This is an AC plug-in light head that can be dimmed with your own AC 110v dimming set up (US AC plug input, 1000W recommended).
The DLH652T, tungsten focusing light head by dedolight is very elegant. Like all its relatives, its patented double aspheric lensing outputs the cleanest and most controllable beam available today. Most are not used to the variety of set-ups this popular light head size can achieve without additional accessories. This light has a native flood to spot range of 56°- 8°, and a focal intensity ratio of 1:13. But you can shift the range to 56º-88º just by dropping in front the Wide-angle beam spreader (DLWA400R); 8º to 88º with a single drop-in attachment. In its native 8º super-spot, it is a great choice to work with the Lightstream collection of reflectors. Three halogen lamps are available to modulate the output: 300w, 500w or 650w, along with a set of scrims that includes a graduated one. Both the DMX and non-DMX versions have built-in AC cable terminating with a bulkhead connector. The sets include a bulkhead to 3-prong AC extension cable with inline on/off switch (DCAB3A-SW-U). The DMX version (DLH652T-DMX) in addition can be dimmed manually or via DMX from the electronic module built to the side of the body. Beyond the native light capacities there is an entire world of optional attachments (A-size). Try the DP400 projector, or the DPBA-1419 Intensifier (320% output increase at a tight 8º spot).
3400K - 3000K (depending on intensity)
True 0-100% smooth dimming
56°- 8° (1:13) - (With optional DLWA400R optical aspheric wide-angle attachment, take the wide angle from 56°- 88°)
Passive silent cooling
Dual 5/8" (16mm-Baby) vertical or horizontal receptacles or 1 1/8" (Junior) stud. Tilt pivot is adjustable for center of gravity adjusting when using accessories. Permanent friction and positive locking
Locking & Tightening friction knob
Safety switch prevents operation when access door is open
non-DMX: 9 lbs, DMX: 10 lbs
Double UV Lens protection - lowest UV of any comparable light source!
The DLH652 (DMX and non-DMX) do not need a ballast. They pull only 6 Amp at 120v. They have a 1' built-in AC cable with a bulkhead connector (not a NEMA 5-15) to pack as compact and lightweight as possible. The included detachable extension/adapter cable (bulkhead to regular AC NEMA 3-prong) plugs into a regular house outlet. For the DLH652T (non-DMX) we recommend two completely silent professional dimmers to operate under the safest conditions:
OPTIONAL - DLDIM2000-U - 110v AC in-line manual dimmer for use with the DLH652T light (non-DMX).
OPTIONAL - DLDIM2000-DMX-U - 110v in-line AC DMX ballast for use with the DLH652T light (non-DMX). No manual dimming.
650w max (use 300w, 500w or 650w halogen lamps)
Automatic sensing 100 - 240 VAC
LED status indicators (Ready, Lamp, Heat)
IP65 housing weather-resistant (non-DMX model)
Built-in AC bulk cable + DCAB3A-SW-U Bulk to AC extension/adapter cable (in line switch on AC cable is not waterproof).Call for installation of a waterproof switch.
DBD400 - 8-leaf barn door (included in basic set)
DPLS400 - Light shield ring (included in basic set)
DCAB3A-SW-U - Extension/Adapter cable, bulkhead to 3-prong NEMA 5-15 US AC, 16' (included in basic set)