ABOUT THE MODIFICATION  - This is a ProCali custom modification replacing the factory V-mount by a Gold mount featuring a female D-tap 15v DC receptacle. Thanks to the addition of the DC input, AC/DC adapters are optional. Warranty is not affected by this modification.

The new dedolight "NEO" light set includes a DLED7N-BI 80w bicolor LED focusing light head, a DTneo control ballast (for the wireless version see the DTneo+ model), DBD8 barn door, DPLS light shield ring and a 4 ft head cable. 

THE DLED7N-BI LIGHT HEAD

The DLED7N-BI bi-color light head is a perfect balance of output strength and control. This light is constantly consuming 80w of power from the DTneo ballast and alternating it between two 80w diode sets in its array. This means no matter what color diodes (tungsten or daylight) are on at any given time the light is always giving you what you've paid for: not 40w on one color and 40w on another, but 80W each. You might have experienced open-faced LED lights requiring a reflector accessory to get a fixed beam angle. Dedolight LED focusing lights are not that; out of the box the light has a manual focusing range of 60°- 6° (1:10 light ratio) without any reflector or accessory, similar to a camera zoom. Dedolight clean, precise and variable diameter beam gives you complete control. If you know the DLED7 series well, the new dedolight NEO DLED7N has the same beam quality and output from its predecessor. The main difference with dedolight Neo is in the back casing which is modified to better contain light leaks. This redesign makes what was already a compact light head an incredible 30% shorter during operation. The DLED7N head fits the same accessories (M size) as the Classic 100/150W dedolight DLH4, DLHM4-300 and DLH200 200W HMI. 

THE DTNEO BALLAST

This is where the dedolight NEO series truly separates itself from its predecessor. Gone are the days when you had to choose between an AC, DC or DMX ballast from the previous DLED series. The DTneo, and DTneo+ (wireless option) offer all the functions you'd hope to have in a single ballast, and delivers even more. DMX is a standard feature to all Neo ballasts. As to powering, this modified DTneo+ has a Gold mount plate (for 15v Gold mount batteries) and a D-tap chassis receptacle to use other DC sources (belts, blocks etc) or AC/DC adapters.  If you use AC power, we strongly recommend ProCali high-performance power supply (0CAPS15-105AB) that provides all the protections your ballast deserves.  DTNeo ballasts are intuitive: use the simple push/turn knob and OLED displayed menu to choose between a deep, smooth "linear" or "exponential" dimming curve, and seamless color changing down at even the lowest output power (0.1 to 100% dimming range). Take advantage of 1000 point 8-bit linear, or 16-bit advanced control (via DMX/RDM protocol). A setting allows for shooting at high-speed up to 50,000fps. The DTneo ballasts have an auto-detect feature to recognize and drive all the upcoming DLEDNeo light heads between 20w-80w. That's not a typo. If you wish to invest for the future, the upcoming DLED3Neo unit, the DLED7Neo Infra-red, Ultra-Violet and even the future generations of DLED7Neo, the DTneo commands them all, up to the Neo DLED9. To put it simply, the DTNeo ballast opens the world to an entire new generation of light heads, and the DLED7N-BI leads the party. 

SET INCLUDES:

• DLED7N-BI - 80w LED bi-color focusing light head
• DTneo - DC Ballast with modified Gold-mount plate & 15v DC D-Tap input receptacle.
• DPOWN - 4' head cable
• DBD8 - 8 leaf barn door
• DPLS - Light shield ring

KEY FEATURES 

Double the output in CCT ranges, broader focusing range and better shadows when compared to a full spectrum light head.

BALLAST

KEY FEATURES

• DMX onboard all DTneo ballasts
• Perfectly smooth linear or exponential dimming (user-selectable), with 16-bit advanced control via DMX/RDM protocol. Manual or DMX step-free dimming range from 0.1% to full power
• Wireless control via CRMX LumenRadio and Bluetooth (DTneo+ model only)
• Auto-sense the connected light head and automatically adjust the electronic settings and menu display
• Interchangeable attachments for DC battery or AC operation via D-Tap
• features a normal speed flicker free mode, as well as a high speed flicker free mode up to 50,000fps
• Simple, intuitive menu with an OLED display
• Very power efficient electronics
• Future-proof thanks to the Firmware upgradeability
• Mounting hardware slide into the rugged aluminum housing

• 0CAPS15-105AB - ProCali high performance AC power supply. 15V DC out 105W (7Amp) with 2-Pin D-Tap connector and US AC cord. UL.
• DPOWN-3 - 9' Ballast-to-head extension cable
• DPOWN-10 - 33' ballast-to-head extension cable

PHOTOMETRICS

Photometrics of the DLED7-BI are identical to the DLED7N-BI light head.

ACCESSORIES

• DP1.2 - Imager projector with 85mm lens (previously the DP1.1)
• DP2.2 - Dedicated shutter projector with 85mm lens (previously the DP2.1)
• DPBA-710 - Parallel Beam Intensifier (up to 163% increase in spot)
• DPBA-714 - Parallel Beam Intensifier (up to 264% increase in spot)
• DLWAR - Wide angle lens adapter with rotating barn doors ( shifts beam range from native to 54°-90°)

Search for all "M" Size accessories for use with the DLED7N!