1. Home
  2. Ledraptor3 Soft Light Set, 3ft, 220w Bi-Color LED Soft Light with DT10-BI Ballast & DMX - (SETDLRAP3-BI)

Ledraptor3 Soft Light Set, 3ft, 220w Bi-Color LED Soft Light with DT10-BI Ballast & DMX - (SETDLRAP3-BI)

  • $3,856.00
  • $3,122.00
Zoom image

Ledraptor3 Soft Light Set, 3ft, 220w Bi-Color LED Soft Light with DT10-BI Ballast & DMX - (SETDLRAP3-BI)

  • $3,856.00
  • $3,122.00
Optional Grid:
Optional Case:

This is a complete light set for the 220w, bi-color Ledraptor3 soft light from dedolight. The set includes the light head, ballast, head and mains cables, textile reflector dome, diffuser and baffle. The DT10-BI ballast powers both sides of the daylight and tungsten diodes at a constant 220W, regardless of what diodes are active (2700K - 6500K). We call this a "2x 220w" light to make sure you know we don't power 110w to one side, and 110w to the other, and calling it a 220w light!

A soft light should hug, not punch - so Ledraptor dedicated soft lights are built specifically for pushing light to the outer edges of the dome. As a result of this engineering, our soft lights have 225% more light on the outside edges of the dome than the competition.

SET INCLUDES:

  • DLRAP3-BI - Ledraptor3 2x 200w bi-color light head
  • DT10-BI - DMX control ballast with mains cable
  • DPOW10 - Head cable
  • DLRAP3-P - "Panaura" 3ft Octo-dome textile reflector
  • Inner baffle diffuser
  • 3' Front diffuser 

    [TABS]
    FEATURES 
    Color Temperature
    Continuous adjustment from 2700-6500k
    Power
    Max power consumption 220w, alternating between two, 220w light sources (2x 220w)
    Cooling Active silent cooling
    Mounting
    Dual 5/8" Baby (16mm) vertical or horizontal receptacles, or 1-1/8" (28mm) Junior stud
    Operating Position Any position
    Soft Box Size 3' 
    Tilt Control Friction knob
    Safety Protection Class III, SLEV, IP20
    Weight 12 lb
    UV No UV radiation
    PHOTOMETRICS

    DLED7 Photometrics

    CRI Re @5600K 97
    CRI Re @ 3200K 96
    TLCI @ 5600K 96
    TLCI @ 3200K 97
    SPECTRAL ABOUT DEDOLIGHT LEDs
    BALLAST

    DT10-BI

    Dimming Continuous - 100 - 0%
    Control Color and dimming knobs for manual operation
    Max Power 350w
    Input Voltage
    90 - 264 V AC
    Display
    Digital display for dimming "0-99", color "27-65", and DMX setting
    DMX Control 5 pin XLR input and output, auto-terminating (512 channels)
    Protections Class
    SELV, Protection Class I, IP20
    Size
    14.8 x 3.3 x 2.9"
    Weight
    4.9 lbs
    Required Cables DPOW10 Head cable - 23' , DCAB3A-SW Bulkhead to US AC power, 16.4'


    SUGGESTIONS

    • DLPA3G - Front Grid / Egg Crate (40°) for Panaura 3 Octodome.
    • DEB400H - DT10 Ballast holder to light stand with CLAMP-D 
    • DSC3 -  Soft case for complete SETDLRAP3-BI
    ABOUT

    A soft light should embrace and not punch. It's our opinion that if soft light is what you want, then a dedicated system to do just that is what you should use. The Ledraptor series of soft lights are engineered specifically for pushing light to the outer edges of the dome. That's why our soft lights have 225% more light on the outside edges than the competition. They are built to travel (recommend adding the optional cases) and take under 5 minutes to fully assemble without practice (our record for the 7' model is under a 80 seconds). The octodome textile reflector has two optional diffusion layers (inner baffle and front diffuser), and is wide and shallow allowing rigging in tighter locations. The 3ft system fully deployed is only 24" deep (front to back of the fixture). Try these lights out and you'll see why we call them our "portable windows".

    ACCESSORIES
    • Ballast Stand Holder
    • DSC3 - Soft Travel Case
    • DLPA3G - 40 degree grid
    [/TABS]

    QUESTIONS & ANSWERS

    Have a Question?

    Be the first to ask a question about this product.

    Ask a Question