This is a the basic light set for the DLH1200D, the largest of our double aspheric lensed,"clean-beam" HMI focusing lights. It has everything you need to get the light up and running, including the lamp.
SET INCLUDES:
- DLH1200D - 1200w HMI focusing light head
- DBD1200R - 8-leaf barn door
- DEB1200D - Flicker-free electronic ballast
- DPOW1200D - 33' head cable
- DCAB3A-SW - US AC cable w in-line switch
- DL1200DHR - Metal Halide Lamp
NOTE: See optional hard case options above. With this option Dedolight California customizes the case to fit the light set. By default, the case is not a part of the set.
[TABS]
ABOUT
The dedolight 1200w HMI focusing light delivers a stunning beam replacing several fixed output fixtures in your arsenal. From a 56º flood down to an amazing 5º super-spot, this light has an impressive 1:18 light ratio. But if you drop in front the DLWA1200R Wide Angle attachment the focus range becomes 55º to 85º with a whopping 1:50 (YES 50) light ratio. These focusing lights can achieve natively what most lights can't get close to with multiple attachments. Dedolight HMI light heads use a double UV coating over the front aspheric lens which dramatically decreases an HMI's UV output. These UV number are 1/20 of competitors in the industry making them some of the safest HMI lights for continue use. From the largest of sets, to high-speed shoots, this light is the apex of dedolight focusing technology.
The light is powered by the DEB1200D-U, flicker-free electronic ballast with integrated DMX control and in-rush current controller. If you would rather not use scrims on the head, the ballast dims down to 50%. The DEB1200D-U ballast is rainproof and rugged. You can switch the DLH1200D to 1000Hz for high-speed work. The same ballast also powers the DPB70. Surge protection, silent ventilation, low heat dissipation and short circuit protection keep your ballast trouble-free for years.
KEY FEATURES
Color Temperature |
Lamp # DL1200DHR-NB, 1200w for daylight, single ended, G-22 HMI lamp |
Focus Control |
56°- 5° (1:18) - (Optional DLWAR optical aspheric wide-angle attachment, switch the range to 50°- 85°)
|
Cooling |
Passive silent cooling |
Mounting |
Dual 5/8" (16mm) vertical or horizontal receptacles or 1 1/8" stud |
Operating Position |
Any position |
Tilt Control |
Tightening knob |
Safety |
Safety switch prevents operation when access door is open |
Weight |
23 lbs (10.5 kg) |
UV |
Double UV Lens protection - lowest UV of any comparable light source! |
PHOTOMETRICS
BALLAST
DEB1200DT
Dimming Range |
50 - 100% |
Output Power |
1200w |
Input Voltage |
90 - 264 V AC
|
Display |
LED status indicators (Ready, Lamp, Heat)
|
DMX Control |
DMX standard with auto-start mode |
Protections Class |
Rainproof housing
|
Size |
12.95" x 9.07" x 9"
|
Weight |
25.13 lbs
|
Cables |
DPOW1200D Head cable + 23', DCAB3A-SW AC w inline switch, 16.4'
|
Key Features |
- Low heat dissipation
- Silent ventilator remains off during normal operation and turn on for high heat conditions only
- Inrush control circuit - Spike eliminator.
- Active power factor correction (PFC)
- Overload protection
- Surge Protection
- Full access to all elements and electronics with simple canopy body engineering
|
SUGGESTIONS:
- DEB1200H - Ballast-to-stand holder
- DPLS1200 - Light Shield Ring
- DSCK1200 - 4-Scrim set
ACCESSORIES
- DWAFX1200 - Directional Beam Spreader
- DP1200KU - Imager projector, universal kit with 185mm lens
- DP1200KFS - Dedicated shutter projector kit with 185mm lens
- DLWA1200R - Wide-angle attachment
- DPBA-18 - Parallel Beam Intensifier (98% more light, 5° beam)
- DPBA-1821 - Parallel Beam Intensifier (478% more light, 5° beam)
Search for all 1200 Size accessories to build-out your DLH1200DT!
[/TABS]