One thing dedolight is good at is providing kits of all the various gear they create. Wether it is a light set, or combination of lights and accessories, there are endless combinations to create kits with. Now, there is no exception for dedolight Lightstream gear. This is an expansive dedolight Carry Case Kit; a combination of gear in the medium reflector size (25cm) and under, with grip gear. The main section of the case is a large opening that holds the smaller Lightstream pouches already filled with reflectors. The access to the reflectors is grab-and-go since each size is grouped into smaller pouches within the case. There is plenty of space for all the supporting grip gear needed to provide the foundation for using the reflectors, including 25x DLR-LOCK mounts neatly packed into a laser-cut foam insert in a bottom compartment. The opposite pocket is a slot compartment to house a slew of dedolight bendable, rigid arms to hold the perfect positioning of any reflector (see the full kit list below). Dedolight Lightstream kits provide a more robust offering of reflecting gear for those who always seem to need one more specific reflector in any given set up. Better to be prepared than not.
DIMENSIONS:
- 27.56" x 10.24" x 16.93"
- DSCLSCB textile canvas case is 7.5 lbs empty
- 43.61 lbs fully loaded
[TABS]
LIGHTSTREAM
Lightstream reflectors, when used with dedolight focusing lights and "Parallel Beam Intensifier" lenses, offer a systematic approach to reflecting and redefining light. From a single source, it's possible to create multiple light sources without adding to your power footprint. The light qualities are brilliant, offering hard and soft looks depending on the type reflector, and beam used as its host. The system is brought to life by using a light source with a strait, clean, parallel beam which "DPBA" lenses on dedolights produce. They warp the flood setting of the light back into a powerful strait spot, somewhere between 4° and 8°, depending on the light and lens used. These lenses can get you up to 550% MORE light output than the light can produce natively (DLED3-D with DPBA-610 Intensifier). With that new beam, you can use a #1 reflector to redirect it without major changes (think front-facing mirror, but with better results). Use a #2 Lightstream reflector to spread that host beam to a 12° spot. A #3 Lightstream reflector will shine a 50° flood, and the #4 Lightstream reflector offer a 90°, spread not unlike a standard bounce board. The creative, professional, economic and environmental possibilities are too large to list. "Lightstreaming" with Lightstream reflectors and Parallel Beam Intensifiers is simply a game changer.
KIT CONTENTS
INCLUDES
- 2x DLR1-7x10 - #1 7x10cm reflectors
- 2x DLR2-7x10 - #2 7x10cm reflectors
- 1x DLR3-7x10 - #3 7x10cm reflector
- 1x DLR4-7x10 - #4 7x10cm reflector
- 1x DLR5-7x10 - #5 7x10cm reflector
- 2x DLR1-12x15 - #1 12x15cm reflectors
- 2x DLR2-12x15 - #2 12x15cm reflectors
- 1x DLR3-12x15 - #3 12x15cm reflector
- 1x DLR4-12x15 - #4 12x15cm reflector
- 1x DLR5-12x15 - #5 12x15cm reflector
- 6x DLR1-25x25 - #1 25x25cm reflectors
- 6x DLR2-25x25 - #2 25x25cm reflectors
- 3x DLR3-25x25 - #3 25x25cm reflectors
- 3x DLR4-25x25 - #4 25x25cm reflectors
- 3x DLR5-25x25 - #5 25x25cm reflectors
- 1x DLRP10 - 7x10cm reflector pouch
- 1x DLRP15 - 12x15cm reflector pouch
- 3x DLRP25 - 25x25cm reflector pouches
- 1x SCLEAN - reflector cleaning kit
- 25x DLR-LOCK - mounting locks with 5/8" receivers
- 1x DAPS - blue velvet soft pouch
- 18x DMFC29 - 29cm, 11.4" flexible coupler arms with 5/8" studs
- 2x DMFC40 - 40cm, 15.8" flexible coupler arms with 5/8" studs
- 2x DMFC60 - 60cm, 24" flexible coupler arms with 5/8" studs
- 4x DSTFX29 - 29cm, 11.4" flexible stand extension arms with 5/8" stud and receiver
- 1x DSCLSCB - textile canvas carrying case
[/TABS]
